Overview
Osmo UV Protection Oil is for use on exterior wood including doors, windows, shutters, cladding, fences and summer houses. It’s been specially formulated to protect vertical exterior wood, as it blocks the greying process and reduces wood swelling and shrinkage. The natural oil base is furnished with active ingredients that protect against mould, algae and fungal attacks.
- Highly water and dirt resistant
- Reduces wood swelling and shrinkage
- Resists growth of algae, mildew and fungal
- Does not crack, peel, flake or blister
- Easy application and maintenance
Note: We recommend a tinted base coat to improve UV protection. Osmo UV-Protection Oils perform optimally on vertically structured timber. For horizontal sections, there will be more maintenance.
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Osmo tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Exterior |
| Recommended Use | Vertical wood surfaces in outdoor areas |
| Coverage | Up to 18m2 per litre |
| Drying Time | 12 Hours |
| Re-Coat Time | 12 Hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush, Roller |
| VOC Levels | High |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.
New Wood
- Fresh wood containing natural wood ingredients /extractives (e.g.: Cedar, Teak, Mahogany or Iroko) are often less absorbent and need to weather off first. Weathering helps ingredient rich wood become more absorbent and the wood finish adheres optimally. Weathering is also required if the existing surface has been freshly sanded or renovated.
- Surfaces should be sanded with a 120 grit abrasive and no finer.
- Ensure the surface is clean before application.
- Fill any cracks or gaps with a suitable wood filler.
Old Wood
- Clean existing microporous stains (wood oils) thoroughly, if necessary sand lightly to remove.
- Algae, mould and moss can be removed with .
- Restore greyed and weathered wood with .
- Old paints and lacquers must be removed.
- If desired, pre-treat softwoods, if possible on all sides, with .
Application
Before applying stir the product thoroughly and test a small area to ensure colour and adhesion. Colours can vary dependent on the surface to be treated.
- Do not thin.
- Stir well using a flat stirring stick or spatula before use.
- Apply along the wood grain thinly with a or other suitable brush.
- Work the oil into the surface of the wood.
- Allow to dry for 12 hours under good ventilation.
- Apply a second coat as above.
Note: Always follow the manufacturer's instructions found on the tin.
Aftercare & Storage
Cleaning
Regular cleaning will ensure you surfaces will stay looking good for longer, clean with Osmo .
If intensive cleaning is necessary use or .
Maintenance
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
